MENU
EN
EN ID
BUY PARTS
REQUEST QUOTE
FIND LOCATION
1500228
Call Center 24/7
LIVE CHAT 24 HOURS
CHAT VIA WEBSITE
CHAT VIA WHATSAPP
back
to top
Back to listing page

D6T

Medium Dozers

The new D6T dozer makes high efficiency dozing easy. A smooth-shifting, fully automatic four-speed Cat® transmission continuously optimizes the power train for the application. You save fuel and operator effort, without sacrificing durability, power or productivity. Work smarter too, with a full range of Cat Connect GRADE technology features to fit your job site needs.

Show
Engine Model Cat C9.3 ACERT™
Flywheel Power 161 kW
Displacement 9.3 l
Net Power - 2,200 rpm - ISO 9249/SAE J1349 161 kW
Availability Please Call Admin
Request A Quote Download Brochure
find related used machines
D6T
Request A Quote

FEATURES & BENEFITS

Performance

New, fully automatic four-speed lock-up clutch transmission continuously optimizes gear and engine speed for the application without added operator input.Added gear betwe... Read more

Efficiency

    Full-time Auto Shift for significantly better fuel efficiency with less operator effort – without sacrificing performance.    &nbs... Read more

Cat Connect Technology

    Automatically maintain established blade position with Cat GRADE with Slope Assist (Standard). Finish jobs faster, with better surface quality an... Read more

Ease of Operation

    Change ground speeds easily – in large (half gear) or small (one-tenth gear) increments – with detented thumb roller.     New... Read more

SPECIFICATIONS FOR D6T

Collapse All
Engine
Engine Model Cat C9.3 ACERT™
Flywheel Power 161 kW
Displacement 9.3 l
Net Power - 2,200 rpm - ISO 9249/SAE J1349 161 kW
Net Power - Maximum - ISO 9249/SAE J1349 at 1,200 rpm 183 kW
Build Number 19
Net Power - 2,200 rpm - ISO 9249/SAE J1349 (DIN) 160 kW
Emissions U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 Final
Net Power - Maximum - ISO 9249/SAE J1349 (DIN) at 1,200 rpm 182 kW
Note (1) All non-road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
Note (3) The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Note (2) Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Service Refill Capacities
Fuel Tank 368 l
DEF Tank 17.1 l
Weights
Operating Weight 21382 kg
Operating Weights
XL Narrow 22580 kg
XW VPAT 24515 kg
XL VPAT 24060 kg
XW VPAT - With Foldable Blade 26695 kg
XW SU 22185 kg
XL SU 21382 kg
LGP S 23299 kg
XL Fine Grading 22650 kg
LGP VPAT 24733 kg
Note Operating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator.
LGP VPAT - With Foldable Blade 26913 kg
Blades - Capacity
6 VPAT - XW Foldable 5.99 m³
6 VPAT - XL 4.64 m³
6 VPAT - LGP 5.02 m³
6 SU - XL Narrow* 4.95 m³
6 VPAT - XW 5.02 m³
6 S - LGP 3.79 m³
6 SU - XL 5.55 m³
6 SU - XW 5.64 m³
6 VPAT - LGP Foldable 5.99 m³
Note *Not available in all areas.
Dimensions - XL Narrow
Ground Pressure (ISO 16754)(3) 64.5 kPa
Ground Clearance 375 mm
Machine Height - To Product Link Antenna(1) 3253 mm
Length - Basic Tractor(2) 4210 mm
Length - Track on Ground 2814 mm
Note (2) (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively.
Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm.
Width - Tractor - Without Trunnions - Standard Track 2440 mm
Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Dimensions - XW
Length - Track on Ground 2814 mm
Ground Clearance 375 mm
Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm.
Ground Pressure (ISO 16754)(3) 45.8 kPa
Width - Tractor - Without Trunnions - Standard Track 2792 mm
Length - Basic Tractor(2) 4210 mm
Machine Height - To Product Link Antenna(1) 3253 mm
Note (2) (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively.
Dimensions - XW VPAT
Note (2) (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively.
Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Ground Clearance 406 mm
Machine Height - To Product Link Antenna(1) 3303 mm
Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm.
Ground Pressure (ISO 16754)(3) 47.7 kPa
Length - Basic Tractor(2) 5002 mm
Width - Tractor - Without Trunnions - Standard Track 2996 mm
Length - Track on Ground 3245 mm
Dimensions - LGP VPAT
Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Machine Height - To Product Link Antenna(1) 3303 mm
Length - Track on Ground 3245 mm
Note (2) (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively.
Length - Basic Tractor(2) 5002 mm
Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm.
Ground Clearance 406 mm
Ground Pressure (ISO 16754)(3) 43.3 kPa
Width - Tractor - Without Trunnions - Standard Track 3143 mm
Dimensions - XL VPAT
Machine Height - To Product Link Antenna(1) 3253 mm
Length - Basic Tractor(2) 4894 mm
Length - Track on Ground 2814 mm
Note (2) (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively.
Ground Clearance 375 mm
Width - Tractor - Without Trunnions - Standard Track 2717 mm
Ground Pressure (ISO 16754)(3) 67.4 kPa
Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm.
Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Dimensions - XL
Length - Basic Tractor(2) 4210 mm
Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm.
Length - Track on Ground 2814 mm
Ground Clearance 375 mm
Ground Pressure (ISO 16754)(3) 59.7 kPa
Width - Tractor - Without Trunnions - Standard Track 2440 mm
Machine Height - To Product Link Antenna(1) 3253 mm
Note (2) (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively.
Blades - Width
6 VPAT - XW 4160 mm
6 VPAT - XL 3880 mm
6 SU - XL Narrow* 2990 mm
6 SU - XL 3261 mm
6 S - LGP 4063 mm
6 VPAT - LGP 4160 mm
6 VPAT - XW Foldable 3856 mm
6 SU - XW 3562 mm
6 VPAT - LGP Foldable 3856 mm
Note *Not available in all areas.
Dimensions - XW VPAT Foldable
Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm.
Length - Track on Ground 3245 mm
Length - Basic Tractor(2) 5002 mm
Ground Clearance 406 mm
Ground Pressure (ISO 16754)(3) 52 kPa
Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Machine Height - To Product Link Antenna(1) 3303 mm
Width - Tractor - Without Trunnions - Standard Track 2996 mm
Note (2) (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively.
Dimensions - LGP VPAT Foldable
Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm.
Width - Tractor - Without Trunnions - Standard Track 3143 mm
Ground Pressure (ISO 16754)(3) 47.2 kPa
Length - Basic Tractor(2) 5002 mm
Ground Clearance 406 mm
Length - Track on Ground 3245 mm
Machine Height - To Product Link Antenna(1) 3303 mm
Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Note (2) (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively.
Dimensions - LGP
Ground Clearance 406 mm
Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track 3201 mm
Length - Basic Tractor(2) 4415 mm
Length - Track on Ground 3245 mm
Machine Height - To Product Link Antenna(1) 3303 mm
Ground Pressure (ISO 16754)(3) 35.2 kPa
Dimensions - XL Fine Grading
Machine Height - To Product Link Antenna(1) 3253 mm
Length - Track on Ground 2814 mm
Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Length - Basic Tractor(2) 4210 mm
Ground Clearance 375 mm
Ground Pressure (ISO 16754)(3) 64.7 kPa
Note (2) (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively.
Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm.
Width - Tractor - Without Trunnions - Standard Track 2440 mm
Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm.
Note (2) (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively.

SELECT MODELS TO COMPARE

Medium Dozers

D4

Engine Model Cat C4.4
Power - Net 97 kW
Net Power - ISO 9249 97 kW
Net Power - ISO 9249 (DIN) 132 mhp
Compare models
Medium Dozers

D6T

Engine Model Cat® C9 ACERT™
Flywheel Power 149 kW
Gross Power 159 kW
Net Power - Caterpillar 138 kW
Compare models
Medium Dozers

D6 XE

Engine Model Cat C9.3B
Power - Net 161 kW
Net Power - Rated - ISO 9249/SAE J1349 161 kW
Net Power (Rated) - ISO 9249 (DIN) 219 mhp
Compare models
Medium Dozers

D4

Engine Model Cat C4.4
Power - Net 97 kW
Emissions U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014/Korea Tier 4 Final
Net Power (Rated) - ISO 9249 97 kW
Compare models
Medium Dozers

D6R Series III

Engine Model Cat® C9 ACERT™
Flywheel Power 138 kW
Gross Power 159 kW
Net Power - Caterpillar 138 kW
Compare models
Medium Dozers

D6

Engine Model Cat C9.3B
Power - Net 161 kW
Operating Weight 22975 kg
Emissions U.S. EPA Tier 4 Final, EU Stage V, Korea Tier 4 Final
Compare models
Medium Dozers

D7E

Engine Model Cat C9.3
Power - Net 178 kW
Emissions U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)
Net Power - Rated - ISO 9249/SAE J1349 178 kW
Compare models
Medium Dozers

D4

Engine Model Cat C7.1
Power - Net 97 kW
Net Power - 2,200 rpm - ISO 9249 97 kW
Net Power - 2,200 rpm - SAE J1349 95 kW
Compare models
of

How to buy

VIEW ALL
01
SEND REQUEST

Select your equipment and fill out your contact information

02
GET A QUOTE

A sales rep will send you an official quote and other related information

03
PAYMENT & DELIVERY

Payment – Lead time - Delivery

Select Up to
3 Models to Compare
Model 1
Model 2
Model 3
Compare Cancel