Back to listing page

D6T

Medium Dozers

The new D6T dozer makes high efficiency dozing as easy as driving your pickup truck. A smooth-shifting, fully automatic four-speed Cat® transmission continuously optimizes the power train for the application. You save fuel and operator effort, without sacrificing durability, power or productivity. Work smarter too, with a full range of Cat Connect GRADE technology features to fit your job site needs.

Show

Engine Model Cat C9.3 ACERT™

Flywheel Power 161 kW

Displacement 9.3 l

Net Power - 2,200 rpm - ISO 9249/SAE J1349 161 kW

Availability

Please Call Admin

Request A Quote Download Brochure

find related used machines

D6T

Request A Quote

FEATURES & BENEFITS

Performance

New, fully automatic four-speed lock-up clutch transmission continuously optimizes gear and engine speed for the application without added operator input.Added gear betwe... Read more

Efficiency

    Full-time Auto Shift for significantly better fuel efficiency with less operator effort – without sacrificing performance.    &nbs... Read more

Cat Connect Technology

    Automatically maintain established blade mainfall/cross slope with Cat GRADE with Slope Assist (Standard). Finish jobs faster, with better surfac... Read more

Ease of Operation

    Change ground speeds easily – in large (half gear) or small (one-tenth gear) increments – with detented thumb roller.     New... Read more

SPECIFICATIONS FOR D6T

Collapse All

Engine

Engine Model	Cat C9.3 ACERT™
Flywheel Power	161 kW
Displacement	9.3 l
Net Power - 2,200 rpm - ISO 9249/SAE J1349	161 kW
Note (2)	Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Net Power - Maximum - ISO 9249/SAE J1349 at 1,200 rpm	183 kW
Emissions	U.S. EPA Tier 4 Final
Note (1)	All non road Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
Build Number	19

Service Refill Capacities

Fuel Tank	368 l
Cooling System	46 l
Engine Crankcase	24.6 l
Power Train	148 l
Final Drive - Each	13.5 l
Hydraulic Tank	62.5 l
Roller Frames - Each	25 l
Pivot Shaft Compartment	5 l
DEF Tank	17.1 l

Weights

Operating Weight

21382 kg

Operating Weights

LGP A	24417 kg
XW A	22588 kg
XW SU	22185 kg
XW VPAT	24515 kg
LGP S	23299 kg
XL VPAT	24060 kg
XL SU	21382 kg
XL A	21703 kg
LGP VPAT	24733 kg
Note	Operating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator.

Blades - Capacity

XL A - Blade	3.95 m³
XL SU - Blade	5.55 m³
LGP A-Blade	4.94 m³
XW SU - Blade	5.64 m³
LGP S-Blade	3.79 m³
XW VPAT - Blade	5.02 m³
XL VPAT - Blade	4.64 m³
XW A - Blade	4.35 m³
LGP VPAT - Blade	5.02 m³

Dimensions - XW VPAT

Ground Clearance	406 mm
Width - Tractor - Without Trunnions - Standard Track	2996 mm
Note (2)	(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Ground Pressure (ISO 16754)(3)	47.7 kPa
Machine Height - To Product Link Antenna(1)	3303 mm
Length - Basic Tractor(2)	5002 mm
Note (3)	(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Length - Track on Ground	3245 mm
Note (1)	(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).

Dimensions - LGP

Ground Pressure (ISO 16754)(3)	35.2 kPa
Ground Clearance	406 mm
Length - Track on Ground	3245 mm
Length - Basic Tractor(2)	4415 mm
Machine Height - To Product Link Antenna(1)	3303 mm
Width - Tractor - Without Trunnions - Standard Track	3201 mm
Note (3)	(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.

Dimensions - LGP VPAT

Note (3)	(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Ground Pressure (ISO 16754)(3)	43.3 kPa
Machine Height - To Product Link Antenna(1)	3303 mm
Note (1)	(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Width - Tractor - Without Trunnions - Standard Track	3143 mm
Length - Track on Ground	3245 mm
Length - Basic Tractor(2)	5002 mm
Ground Clearance	406 mm
Note (2)	(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.

Dimensions - XW

Length - Track on Ground	2814 mm
Machine Height - To Product Link Antenna(1)	3253 mm
Ground Clearance	375 mm
Note (1)	(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Width - Tractor - Without Trunnions - Standard Track	2792 mm
Note (2)	(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Ground Pressure (ISO 16754)(3)	45.8 kPa
Note (3)	(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Length - Basic Tractor(2)	4210 mm

Dimensions - XL VPAT

Width - Tractor - Without Trunnions - Standard Track	2717 mm
Length - Track on Ground	2814 mm
Ground Clearance	375 mm
Note (1)	(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Ground Pressure (ISO 16754)(3)	67.4 kPa
Note (2)	(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Machine Height - To Product Link Antenna(1)	3253 mm
Length - Basic Tractor(2)	4894 mm
Note (3)	(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.

Blades - Width

XW VPAT - Blade	4160 mm
XW A - Blade	4520 mm
LGP A-Blade	5072 mm
XL VPAT - Blade	3880 mm
LGP VPAT - Blade	4160 mm
LGP S-Blade	4063 mm
XL SU - Blade	3261 mm
XL A - Blade	4160 mm
XW SU - Blade	3562 mm

Dimensions - XL

Machine Height - To Product Link Antenna(1)	3253 mm
Note (2)	(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)	(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Ground Pressure (ISO 16754)(3)	59.7 kPa
Length - Basic Tractor(2)	4210 mm
Width - Tractor - Without Trunnions - Standard Track	2440 mm
Length - Track on Ground	2814 mm
Ground Clearance	375 mm
Note (1)	(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).

Note (1)	(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)	(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.