MENU
ID
EN ID
BELI PARTS
REQUEST QUOTE
Temukan Lokasi
1500228
Call Center 24/7
LIVE CHAT 24 HOURS
CHAT VIA WEBSITE
CHAT VIA WHATSAPP
back
to top
Back to listing page

D6T

Medium Dozers

The new D6T dozer makes high efficiency dozing as easy as driving your pickup truck. A smooth-shifting, fully automatic four-speed Cat® transmission continuously optimizes the power train for the application. You save fuel and operator effort, without sacrificing durability, power or productivity. Work smarter too, with a full range of Cat Connect GRADE technology features to fit your job site needs.

Show
Engine Model Cat C9.3 ACERT™
Flywheel Power 161 kW
Displacement 9.3 l
Net Power - 2,200 rpm - ISO 9249/SAE J1349 161 kW
Availability Please Call Admin
Request A Quote Download Brochure
find related used machines
D6T
Request A Quote

FEATURES & BENEFITS

Performance

New, fully automatic four-speed lock-up clutch transmission continuously optimizes gear and engine speed for the application without added operator input.Added gear betwe... Read more

Efficiency

    Full-time Auto Shift for significantly better fuel efficiency with less operator effort – without sacrificing performance.    &nbs... Read more

Cat Connect Technology

    Automatically maintain established blade mainfall/cross slope with Cat GRADE with Slope Assist (Standard). Finish jobs faster, with better surfac... Read more

Ease of Operation

    Change ground speeds easily – in large (half gear) or small (one-tenth gear) increments – with detented thumb roller.     New... Read more

SPECIFICATIONS FOR D6T

Collapse All
Engine
Engine Model Cat C9.3 ACERT™
Flywheel Power 161 kW
Displacement 9.3 l
Net Power - 2,200 rpm - ISO 9249/SAE J1349 161 kW
Note (2) Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Net Power - Maximum - ISO 9249/SAE J1349 at 1,200 rpm 183 kW
Emissions U.S. EPA Tier 4 Final
Note (1) All non road Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
Build Number 19
Service Refill Capacities
Fuel Tank 368 l
Cooling System 46 l
Engine Crankcase 24.6 l
Power Train 148 l
Final Drive - Each 13.5 l
Hydraulic Tank 62.5 l
Roller Frames - Each 25 l
Pivot Shaft Compartment 5 l
DEF Tank 17.1 l
Weights
Operating Weight 21382 kg
Operating Weights
LGP A 24417 kg
XW A 22588 kg
XW SU 22185 kg
XW VPAT 24515 kg
LGP S 23299 kg
XL VPAT 24060 kg
XL SU 21382 kg
XL A 21703 kg
LGP VPAT 24733 kg
Note Operating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator.
Blades - Capacity
XL A - Blade 3.95 m³
XL SU - Blade 5.55 m³
LGP A-Blade 4.94 m³
XW SU - Blade 5.64 m³
LGP S-Blade 3.79 m³
XW VPAT - Blade 5.02 m³
XL VPAT - Blade 4.64 m³
XW A - Blade 4.35 m³
LGP VPAT - Blade 5.02 m³
Dimensions - XW VPAT
Ground Clearance 406 mm
Width - Tractor - Without Trunnions - Standard Track 2996 mm
Note (2) (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Ground Pressure (ISO 16754)(3) 47.7 kPa
Machine Height - To Product Link Antenna(1) 3303 mm
Length - Basic Tractor(2) 5002 mm
Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Length - Track on Ground 3245 mm
Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Dimensions - LGP
Ground Pressure (ISO 16754)(3) 35.2 kPa
Ground Clearance 406 mm
Length - Track on Ground 3245 mm
Length - Basic Tractor(2) 4415 mm
Machine Height - To Product Link Antenna(1) 3303 mm
Width - Tractor - Without Trunnions - Standard Track 3201 mm
Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Dimensions - LGP VPAT
Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Ground Pressure (ISO 16754)(3) 43.3 kPa
Machine Height - To Product Link Antenna(1) 3303 mm
Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Width - Tractor - Without Trunnions - Standard Track 3143 mm
Length - Track on Ground 3245 mm
Length - Basic Tractor(2) 5002 mm
Ground Clearance 406 mm
Note (2) (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Dimensions - XW
Length - Track on Ground 2814 mm
Machine Height - To Product Link Antenna(1) 3253 mm
Ground Clearance 375 mm
Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Width - Tractor - Without Trunnions - Standard Track 2792 mm
Note (2) (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Ground Pressure (ISO 16754)(3) 45.8 kPa
Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Length - Basic Tractor(2) 4210 mm
Dimensions - XL VPAT
Width - Tractor - Without Trunnions - Standard Track 2717 mm
Length - Track on Ground 2814 mm
Ground Clearance 375 mm
Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Ground Pressure (ISO 16754)(3) 67.4 kPa
Note (2) (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Machine Height - To Product Link Antenna(1) 3253 mm
Length - Basic Tractor(2) 4894 mm
Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Blades - Width
XW VPAT - Blade 4160 mm
XW A - Blade 4520 mm
LGP A-Blade 5072 mm
XL VPAT - Blade 3880 mm
LGP VPAT - Blade 4160 mm
LGP S-Blade 4063 mm
XL SU - Blade 3261 mm
XL A - Blade 4160 mm
XW SU - Blade 3562 mm
Dimensions - XL
Machine Height - To Product Link Antenna(1) 3253 mm
Note (2) (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Ground Pressure (ISO 16754)(3) 59.7 kPa
Length - Basic Tractor(2) 4210 mm
Width - Tractor - Without Trunnions - Standard Track 2440 mm
Length - Track on Ground 2814 mm
Ground Clearance 375 mm
Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2) (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.

SELECT MODELS TO COMPARE

Medium Dozers

D7G Series 2

Model Engine Cat® 3306 DITA
Daya Flywheel 150 kW
Daya Flywheel Maksimum 164 kW
Daya Bersih - Caterpillar 150 kW
Compare models
Medium Dozers

D6 XE

Model Engine C9.3B Cat
Daya - Bersih 161 kW
Net Power - Rated - ISO 9249/SAE J1349 161 kW
Net Power (Rated) - ISO 9249 (DIN) 219 mhp
Compare models
Medium Dozers

D6N FA

Engine Model Cat® 3126B
Flywheel Power 108 kW
Bore 110 mm
Stroke 127 mm
Compare models
Medium Dozers

D5R2

Model Engine C7.1 Cat
Daya - Bersih 114 kW
Daya Bersih - Tetapan* - ISO 9249/SAE J1349 114 kW
Daya Bersih - Tetapan* - ISO 9249/SAE J1349 (DIN) 155 HP
Compare models
Medium Dozers

D6 XE

Engine Model Cat C9.3B
Power - Net 161 kW
Net Power - Rated - ISO 9249/SAE J1349 161 kW
Net Power (Rated) - ISO 9249 (DIN) 219 mhp
Compare models
Medium Dozers

D7E

Model Engine C9.3 Cat
Daya - Bersih 178 kW
Emisi Tier 4 Final AS/Stage IV UE/Jepang 2014 (Tier 4 Final)
Daya Bersih - Tetapan - ISO 9249/SAE J1349 178 kW
Compare models
Medium Dozers

D6K2 (Tier 4 Interim/Stage IIIB)

Engine Model Cat® C6.6 ACERT™
Flywheel Power 97 kW
Net Power - ISO 9249 97 kW
Net Power - SAE J1349 95 kW
Compare models
Medium Dozers

D7

Engine Model Cat C9.3B
Power - Net 197 kW
Net Power - Rated - ISO 9249/SAE J1349 197 kW
Net Power (Rated) - ISO 9249 (DIN) 268 mhp
Compare models
of

How to buy

VIEW ALL
01
SEND REQUEST

Select your equipment and fill out your contact information

02
GET A QUOTE

A sales rep will send you an official quote and other related information

03
DELIVERY & PAYMENT

Payment – Lead time - Delivery

Select Up to
3 Models to Compare
Model 1
Model 2
Model 3
Compare Cancel