MENU
EN
EN ID
BUY PARTS
REQUEST QUOTE
FIND LOCATION
1500228
Call Center 24/7
LIVE CHAT 24 HOURS
CHAT VIA WEBSITE
CHAT VIA WHATSAPP
back
to top
Back to listing page

982M

Medium Wheel Loaders

The new 982M Wheel Loader has a Stage IV ACERT engine equipped with a combination of proven electronic, fuel, air and aftertreatment components. Applying proven technologies systematically and strategically lets us meet our customer's high expectations for productivity and fuel efficiency. Deep system integration results in reduced emissions, improved performance and improved fuel economy without interrupting machine performance making it seamless to operators. M Series Loaders are 10% more fuel efficient than the K Series Loaders and up to 25% more efficient than the H Series Loaders they replace.* The reliability, durability, and versatility of the 982M result in a machine that is better built to meet your needs. Thanks to its longer lift arm and higher hinge pin height compared to 980M, the new 982M excels in loading 30 to 34 tons on-highway trucks in quarry yards, small 36 tons rigid trucks or mobile breakers in quarry pits and large articulated trucks on construction sites. With larger buckets and other available work tools, the 982M will also boost production and fuel efficiency in coal handling and industrial applications, providing you with an exciting new option in this size class. *Fuel efficiency is measured in mass of material moved per volume of fuel burned. Average efficiency improvement as tested and analyzed for an average composite cycle and standard configuration with variations per comparable model with and without Economy Mode active. Factors influence result variation such as, but not limited to, machine configuration, operator technique, machine application, climate, etc.

Show
Engine Model Cat? C13 ACERT?
Bore 130 mm
Stroke 157 mm
Displacement 12.5 l
Availability Please Call Admin
Request A Quote
982M
Request A Quote

FEATURES & BENEFITS

Reliable

Every Stage IV ACERT engine is equipped with a combination of proven electronic, fuel, air and aftertreatment components.More Powerful, Reliable Engine ElectronicsThe ele... Read more

Durable

FramesThe robotically welded two-piece structural frame design provides strong and rigid structures that absorb all the forces associated to penetration, loading and twis... Read more

Productive

The right technologies fine-tuned for the right applications result in:Improved Fluid Efficiency – Up to 5% improvement over Stage IIIB products (including Diesel Exhaust... Read more

Fuel Efficient

Engine and EmissionsThe Cat C13 ACERT engine is designed for maximum fuel efficiency and increased power density, while meeting Stage IV emission standards. This engine f... Read more

Easy to Operate

Ensuring operators are safe, confident in the control of their machines, have a clean, comfortable and quiet operating environment with controls that are intuitive and lo... Read more

Versatile

Z-bar LinkageThe proven Z-bar linkage combines digging efficiency with excellent visibility to the tool resulting in excellent penetration into the pile, high breakout fo... Read more

Integrated Technologies

Cat Connect makes smart use of technology and services to improve your job site efficiency. Using the data from technology-equipped machines, you'll get more information... Read more

Owning Costs

Customer Support AgreementsA Customer Support Agreement (CSA) is an arrangement between you and your Cat dealer that helps you lower your total cost per ton. CSAs are fle... Read more

Operating Costs

Machine configuration, operator technique, and job site layout can impact fuel consumption by as much as 30 percent. Data from customer machines show Cat wheel loaders ar... Read more

SPECIFICATIONS FOR 982M

Collapse All
Engine
Engine Model Cat? C13 ACERT?
Bore 130 mm
Stroke 157 mm
Displacement 12.5 l
Peak Gross Torque - 1,200 rpm - SAE J1995 2206 N·m
Maximum Power - 1,700 rpm - ISO 14396 321 kW (436 hp metric)
Maximum Net Power - 1,700 rpm - ISO 9249 297 kW (404 hp metric)
Maximum Power - ISO 14396 321 kW (436 hp metric)
Net Power - ISO 9249 297 kW
Maximum Net Torque - 1,100 rpm - ISO 9249 2058 N·m
Maximum Net Power - ISO 9249 297 kW (404 hp metric)
Peak Torque - 1,200 rpm - ISO 14396 2182 N·m
Maximum Gross Power - 1,700 rpm - SAE J1995 325 kW (442 hp metric)
Emissions Cat engine with ACERT Technology ? meets Stage IV emission standards.
Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and aftertreatment.
Note (3) The gross power advertised is with the fan at maximum speed.
Note (1) The power ratings apply at the stated speed when tested under the reference conditions for the specified standards.
Weights
Operating Weight 35563 kg
Note Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound suppression, and a 6.1 m3 general purpose bucket with BOCE.
Buckets
Bucket Capacities 4.6-12.0 m? (6.0-15.75 yd3)
Operating Specifications
Breakout Force 260 kN
Static Tipping Load - Full 40° Turn - No Tire Deflection 22393 kg
Static Tipping Load - Full 40° Turn - With Tire Deflection 21080 kg
Note (2) Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Note (1) For a machine configuration as defined under ?Weight.?
Transmission
Forward - 1 6.2 km/h
Forward - 2 11.9 km/h
Forward - 3 21.1 km/h
Forward - 4 37.5 km/h
Reverse - 1 7 km/h
Reverse - 2 13.6 km/h
Reverse - 3 24.1 km/h
Reverse - 4 40 km/h
Note Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm roll radius.
Hydraulic System
Hydraulic Cycle Time - Rated Payload - Lower, Empty, Float Down 3.1 s
Implement System - Optional 3rd Function Maximum Pressure 21780 kPa
Implement System - Maximum Operating Pressure 34300 kPa
Hydraulic Cycle Time - Rated Payload - Raise from Carry Position 5.3 s
Hydraulic Cycle Time - Rated Payload - Total 10.1 s
Hydraulic Cycle Time - Rated Payload - Dump, at Maximum Raise 1.7 s
Implement Pump Type Variable Displacement Piston
Implement System - Optional 3rd Function Maximum Flow 240 l/min
Implement System - Maximum Pump Output at 2,250 rpm 449 l/min
Brakes
Brakes Brakes meet ISO 3450:2011 standards
Axles
Front Fixed
Rear Oscillating ?13 degrees
Maximum Single-Wheel Rise and Fall 549 mm
Cab
ROPS/FOPS ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
Service Refill Capacities
Cooling System 53 l
Crankcase 37 l
Transmission 90 l
Hydraulic Tank 153 l
Differential - Final Drives - Front 84 l
Differential - Final Drives - Rear 84 l
Fuel Tank 441 l
DEF Tank 21 l
Sound
Operator Sound Pressure Level - ISO 6396:2008 72 dB(A)
Exterior Sound Pressure Level - SAE J88:2013** 78 dB(A)
Note (2) *For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at 70% of maximum value.
Note (1) The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when the machine is operated with a cabin that is not properly maintained, or when the doors and/or windows are open for extended periods or in a noisy environment.
Note (3) **For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in second gear ratio with the cooling fan speed set at maximum value.
Exterior Sound Power Level - ISO 6395:2008 (European Union Directive "2000/14/EC" as amended by "2005/88/EC")* 109 dB(A)
Air Conditioning System
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.

SELECT MODELS TO COMPARE

Medium Wheel Loaders

980M (TIER 3/STAGE IIIA) (2016)

Net Power - ISO 9249 278 kW
Engine Model Cat C13 ACERT
Displacement 12.5 l
Maximum Gross Power - 1,800 rpm - SAE J1995 307 kW
Compare models
Medium Wheel Loaders

980G Series II

Compare models
Medium Wheel Loaders

972M XE

Net Power - ISO 9249 232 kW
Emissions Tier 4/Stage IV
Maximum Net Power - 1,600 rpm - SAE J1349 - Metric 232 kW
Displacement 9.3 l
Compare models
Medium Wheel Loaders

960F

Compare models
Medium Wheel Loaders

962K

Net Power - ISO 9249 165 kW
Engine Model Cat? C7.1 ACERT?
Bore 105 mm²
Stroke 135 mm²
Compare models
Medium Wheel Loaders

972K

Net Power - ISO 9249 203 kW
Engine Model Cat C9.3
Operating Weight 26350 kg
Bucket Capacities 4.8m3
Compare models
Medium Wheel Loaders

980M

Net Power - ISO 9249 288 kW
Emissions Tier 4/Stage IV
Maximum Power - 1,700 rpm - SAE J1995 317 kW
Engine Model Cat C13
Compare models
Medium Wheel Loaders

980H

Net Power - ISO 9249 260 kW
Engine Model Cat? C15 ACERT?
Net Power - 80/1269/EEC 263 kW
Gross Power - SAE J1995 293 kW
Compare models
of

How to buy

VIEW ALL
01
SEND REQUEST

Select your equipment and fill out your contact information

02
GET A QUOTE

A sales rep will send you an official quote and other related information

03
PAYMENT & DELIVERY

Payment – Lead time - Delivery

Select Up to
3 Models to Compare
Model 1
Model 2
Model 3
Compare Cancel