Back to listing page

980M

Medium Wheel Loaders

The new 980M Wheel Loader has either a Tier 2/Stage II, Tier 3/Stage IIIA equivalent or Tier 4 Final/Stage IV, depending on emission standards of specific country, engine equipped with a combination of proven electronic, fuel, air and aftertreatment components. Applying proven technologies systematically and strategically lets us meet your high expectations for productivity and fuel efficiency. Deep system integration results in reduced emissions, improved performance and improved fuel economy without interrupting machine performance making it seamless to you. The reliability, durability, and versatility of the 980M result in a machine that is better built to meet your needs.

Show

Net Power - ISO 9249 288 kW

Engine Model Cat? C13 ACERT?

Tier 2/Stage II, Tier 3/Stage IIIA Equivalent: Maximum Power - SAE J1995 307 kW

U.S. EPA Tier 4 Final/EU Stage IV - Maximum Power - SAE J1995 317 kW

Availability

Please Call Admin

Request A Quote Download Brochure

980M

Request A Quote

FEATURES & BENEFITS

SPECIFICATIONS FOR 980M

Collapse All

Engine

Net Power - ISO 9249	288 kW
Engine Model	Cat? C13 ACERT?
Tier 2/Stage II, Tier 3/Stage IIIA Equivalent: Maximum Power - SAE J1995	307 kW
U.S. EPA Tier 4 Final/EU Stage IV - Maximum Power - SAE J1995	317 kW

Weights

Operating Weight	30090 kg
Note (1)	For 5.4 m3 (7.1 yd3) general purpose buckets with BOCE.
Note (2)	Weight based on a machine configuration with Michelin 29.5R25 XLDD1 L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound suppression, and a 5.4 m3 (7.1 yd3) general purpose bucket with BOCE.

Buckets

Bucket Capacities

4.2-12.2 m3 (5.25-16.0 yd3)

Operating Specifications

Breakout Force	224 kN
Static Tipping Load - Full 40° Turn - With Tire Deflection	19565 kg
Static Tipping Load - Full 40° Turn - No Tire Deflection	20796 kg
Note	Full compliance to ISO (2007) 143971 Sections 1 thru 6, which requires 2% verification between calculations and testing.

Transmission

Forward - 1	6.9 km/h
Forward - 2	13.3 km/h
Forward - 3	23.5 km/h
Forward - 4	39.5 km/h
Reverse - 1	7.8 km/h
Reverse - 2	15.2 km/h
Reverse - 3	26.9 km/h
Reverse - 4	39.5 km/h
Note	Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 933 mm (37 in) roll radius.

Hydraulic System

Hydraulic Cycle Time - Rated Payload - Dump, at Maximum Raise	1.7 s
Hydraulic Cycle Time - Rated Payload - Total	10.1 s
Implement System - Optional 3rd Function Maximum Flow	240 l/min
Implement System - Optional 3rd Function Maximum Pressure	21780 kPa
Hydraulic Cycle Time - Rated Payload - Raise from Carry Position	5.3 s
Implement Pump Type	Variable Displacement Piston
Hydraulic Cycle Time - Rated Payload - Lower, Empty, Float Down	3.1 s
Implement System - Maximum Pump Output at 2,250 rpm	449 l/min
Implement System - Maximum Operating Pressure	34300 kPa

Brakes

Brakes meet ISO 3450:2011 standards

Axles

Front	Fixed
Rear	Oscillating ?13 degrees
Maximum Single-Wheel Rise and Fall	571 mm

Cab

ROPS/FOPS

ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards

Service Refill Capacities

Cooling System	53 l
Hydraulic Tank	153 l
Fuel Tank	426 l
DEF Tank	21 l
Crankcase	37 l
Differential - Final Drives - Front	84 l
Differential - Final Drives - Rear	84 l
Transmission	77 l

Sound - Tier 2/Stage II, Tier 3/Stage IIIA Equivalent

Note (3)	**For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in second gear ratio with the cooling fan speed set at maximum value.
Note (2)	*For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at maximum value.
Exterior Sound Power Level - ISO 6395:2008*	112 dB(A)
Operator Sound Pressure Level - ISO 6396:2008	75 dB(A)
Exterior Sound Pressure Level - SAE J88:2013**	78 dB(A)
Note (1)	The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when the machine is operated with a cabin that is not properly maintained, or when the doors and/or windows are open for extended periods or in a noisy environment.

Sound - Tier 4 Final/Stage IV

Note (2)	*For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at maximum value.
Exterior Sound Power Level - ISO 6395:2008*	112 dB(A)
Exterior Sound Pressure Level - SAE J88:2013**	78 dB(A)
Note (1)	The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when the machine is operated with a cabin that is not properly maintained, or when the doors and/or windows are open for extended periods or in a noisy environment.
Operator Sound Pressure Level - ISO 6396:2008	72 dB(A)
Note (3)	**For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in second gear ratio with the cooling fan speed set at maximum value.

Engine - Tier 2/Stage II, Tier 3/Stage IIIA Equivalent

Displacement	12.5 l
Emissions	Cat engine with ACERT Technology ? meets Tier 2/Stage II, Tier 3/Stage IIIA equivalent emission standards.
Stroke	157 mm
Bore	130 mm
Maximum Net Torque - 1,000 rpm - SAE J1349	2040 N·m
Maximum Net Power - 1,800 rpm - SAE J1349	278 kW
Peak Gross Torque - 1,300 rpm - SAE J1995	2192 N·m
Maximum Power - 1,800 rpm - SAE J1995	307 kW
Engine Model	Cat C13 ACERT

Engine - Tier 4 Final/Stage IV

Maximum Power - 1,700 rpm - SAE J1995	317 kW
Engine Model	Cat C13 ACERT
Maximum Net Power - 1,700 rpm - SAE J1349	288 kW
Bore	130 mm
Peak Gross Torque - 1,200 rpm - SAE J1995	2206 N·m
Note (1)	The power ratings apply at the stated speed when tested under the reference conditions for the specified standards.
Maximum Net Torque - 1,100 rpm - SAE J1349	2054 N·m
Emissions	Cat engine with ACERT Technology ? meets Tier 4 Final/Stage IV emission standards.
Note (2)	The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and aftertreatment.
Displacement	12.5 l
Stroke	157 mm
Note (3)	The gross power advertised is with the fan at maximum speed.