MENU
EN
EN ID
BUY PARTS
REQUEST QUOTE
FIND LOCATION
1500228
Call Center 24/7
LIVE CHAT 24 HOURS
CHAT VIA WEBSITE
CHAT VIA WHATSAPP
back
to top
Back to listing page

966M XE (2016)

Medium Wheel Loaders

The new 966M XE Wheel Loader has a U.S. EPA Tier 4 Final and EU Stage IV ACERT™ engine equipped with a combination of proven electronic, fuel, air and aftertreatment components. Applying proven technologies systematically and strategically lets us meet our customer's high expectations for productivity, fuel efficiency, reliability and service life. Deep system integration results in reduced emissions, improved performance and improved fuel economy without interrupting machine performance making it seamless to operators. The XE technology results in a 25% improvement in fuel efficiency over the M Series standard configuration and 35% over the K Series standard configuration. (Fuel efficiency is measured in mass of material moved per volume of fuel burned. Average efficiency improvement as tested and analyzed for an average composite cycle and stand configuration with variations per comparable model with and without economy mode active. Factors influence result variation such as, but not limited to, machine configuration, operator technique, machine application, climate, etc.) The 966M XE Wheel Loader, with an advanced power train, has been designed to deliver superior performance and fuel efficiency while simplifying the operator's interface and operating technique. Aggregate Handler and other optional configurations are available. (Optional configuration and equipment may vary from region to region. Consult your Caterpillar representative for further details.)

Show
Engine Model Cat C9.3 ACERT
Net Power - ISO 9249 222 kW
Maximum Net Power - 1,600 rpm - ISO 9249 222 kW
Maximum Net Power - 1,600 rpm - ISO 9249 - Metric 222 kW
Availability Please Call Admin
Request A Quote Download Brochure
966M XE (2016)
Request A Quote

FEATURES & BENEFITS

Key Features

Benefits to help get your work done efficiently and effectively Read more

RELIABILITY, PRODUCTIVITY AND FUEL EFFICIENCY

25% more fuel efficient than M Series standard configuration*35% more fuel efficient than K Series standard configuration**Fuel efficiency is measured in mass of material... Read more

Linkage and Work Tools

Performance Series buckets and range of work toolsFusion™ « zero-offset » coupler (option) Read more

Engine and Aftertreatment Advancements

Cat® engine with ACERT TechnologyU.S. EPA Tier 4 Final and EU Stage IV emission standardsCat Clean Emissions Module (CEM) with Selective Catalytic Reduction and automatic... Read more

Transmission Advancements

Next generation integrated continuously variable transmission with multi-viscosity oilPower train control independent of engine speed with energy recovery Read more

Axle Advancements

On-the-go disc-type front differential locks (front and rear fully automatic option)Caliper disc parking brakeBevel gear shrouds Read more

Next Generation Hydraulic Systems

Next generation main valveNext generation ride control system with dual accumulatorsNext generation implement pump with increased displacementFull flow and kidney loop fi... Read more

EASE OF OPERATION – Best-in-class Operator Environment

Optimized all-around visibilityE-H joystick steering (steering wheel optional)Touch screen multifunction color display with integrated controls and rearview cameraStair-l... Read more

EASE OF OPERATION – Advanced Technology with Cat Connect

Link technologies, like Product Link™ to monitor equipment and manage production using online VisionLink® softwarePayload technologies, like Cat Production Measurement (o... Read more

SPECIFICATIONS FOR 966M XE (2016)

Collapse All
Engine
Engine Model Cat C9.3 ACERT
Net Power - ISO 9249 222 kW
Maximum Net Power - 1,600 rpm - ISO 9249 222 kW
Maximum Net Power - 1,600 rpm - ISO 9249 - Metric 222 kW
Maximum Net Power - 1,600 rpm - SAE J1349 222 kW
Maximum Net Power - 1,600 rpm - SAE J1349 - Metric 222 kW
Peak Gross Torque - 1,200 rpm - SAE J1995 1728 N·m
Peak Gross Torque - 1,200 rpm - ISO 14396 1708 N·m
Maximum Net Torque - 1,200 rpm 1618 N·m
Displacement 9.3 l
Service Refill Capacities
Cooling System 71.6 l
Crankcase 24.5 l
Transmission 63 l
Hydraulic Tank 125 l
Differential - Final Drives - Rear 57 l
Differential - Final Drives - Front 57 l
Fuel Tank 313 l
DEF Tank 16.8 l
Sound
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)** 67 dB(A)
Note (1) *Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 67 dB(A)
Note (2) **For machines in European Union countries and in countries that adopt the ?EU Directives.?
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)** 105 LWA***
Note (3) ***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.?
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) 76 dB(A)*
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) 107 dB(A)
Weights
Operating Weight 23220 kg
Note Weight based on a machine configuration with Michelin 26.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, manual diff lock/open axles (front/rear), power train guard, secondary steering, sound suppression and a 4.2 m3 (5.5 yd3) general purpose bucket with BOCE.
Operating Specifications
Breakout Force 173 kN
Static Tipping Load - Full 37° Turn - With Tire Deflection 14668 kg
Static Tipping Load - Full 37° Turn - No Tire Deflection 15822 kg
Note (2) Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Note (1) For a machine configuration as defined under ?Weight.?
Transmission - Virtual Gears
Forward - 3 22.1 km/h
Forward - 4 39.5 km/h
Forward - 2 12.6 km/h
Forward - 1 6.7 km/h
Reverse - 2 12.6 km/h
Reverse - 1 6.7 km/h
Reverse - 3 28 km/h
Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 826 mm (32.5 in) roll radius.
Bucket Capacities
Bucket Capacities 2.5-9.2 m? (3.25-12.0 yd?)
Hydraulic System
Implement System - Maximum Pump Output at 1,600 rpm 385 l/min
Implement System - Maximum Operating Pressure 31000 kPa
Implement Pump Type Variable Displacement Piston
Hydraulic Cycle Time - Total 10.1 s
Dimensions - High Lift
Note All dimensions are approximate and based on L3 XHA2 tires.
Centerline of Rear Axle to Edge of Counterweight 2500 mm
Overall Length - Without Bucket 8109 mm
Height - Top of Exhaust Pipe 3522 mm
Wheel Base 3550 mm
Height - Top of Hood 2818 mm
Rack Back - Maximum Lift 71 degrees
Height - Top of ROPS 3587 mm
Ground Clearance 434 mm
Centerline of Rear Axle to Hitch 1775 mm
Hinge Pin Height at Carry 778 mm
Lift Arm Clearance at Maximum Lift 4140 mm
Tread Width 2230 mm
Maximum Width over Tires 3009 mm
Rack Back at Ground 39 degrees
Rack Back - Carry Height 49 degrees
Hinge Pin Height at Maximum Lift 4793 mm
Dimensions - Standard Lift
Rack Back - Carry Height 50 degrees
Maximum Width over Tires 3009 mm
Ground Clearance 434 mm
Hinge Pin Height at Maximum Lift 4235 mm
Lift Arm Clearance at Maximum Lift 3643 mm
Height - Top of ROPS 3587 mm
Height - Top of Exhaust Pipe 3522 mm
Height - Top of Hood 2818 mm
Hinge Pin Height at Carry 630 mm
Tread Width 2230 mm
Overall Length - Without Bucket 7289 mm
Centerline of Rear Axle to Hitch 1775 mm
Centerline of Rear Axle to Edge of Counterweight 2180 mm
Wheel Base 3550 mm
Rack Back at Ground 42 degrees
Note All dimensions are approximate and based on L3 XHA2 tires.
Rack Back - Maximum Lift 62 degrees

SELECT MODELS TO COMPARE

Medium Wheel Loaders

IT62H

Net Power - ISO 9249 158 kW
Engine Model C7 ACERT
Net Power - 80/1269/EEC 158 kW
Flywheel Power 158 kW
Compare models
Medium Wheel Loaders

980K

Net Power - ISO 9249 274 kW
Engine Model Cat? C13 ACERT?
Bore 130 mm
Stroke 157 mm
Compare models
Medium Wheel Loaders

962M

Engine Model Cat? C7.1 ACERT?
Bore 105 mm
Stroke 135 mm
Displacement 7.01 l
Compare models
Medium Wheel Loaders

982

Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 301 kW
Engine Model Cat C13
Note (1) Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards.
Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
Compare models
Medium Wheel Loaders

966 GC

Net Power - ISO 9249 196 kW
Engine Model Cat C9.3B
Stroke 149 mm
Displacement 9.3 l
Compare models
Medium Wheel Loaders

950G Series II

Engine Model Caterpillar 3126B with ATAAC
Flywheel Power 136 kW
Maximum Flywheel Power 146 kW
Peak Torque - 1,400 rpm - Net 907 N·m
Compare models
Medium Wheel Loaders

966K

Net Power - ISO 9249 190 kW
Engine Model Cat C9.3
Operating Weight 24200 kg
Bucket Capacities 4.2m3
Compare models
Medium Wheel Loaders

980H

Net Power - ISO 9249 264 kW
Engine Model Cat? C15 ACERT?
Gross Power - SAE J1995 293 kW
Bore 137 mm
Compare models
of

How to buy

VIEW ALL
01
SEND REQUEST

Select your equipment and fill out your contact information

02
GET A QUOTE

A sales rep will send you an official quote and other related information

03
PAYMENT & DELIVERY

Payment – Lead time - Delivery

Select Up to
3 Models to Compare
Model 1
Model 2
Model 3
Compare Cancel