MENU
EN
EN ID
BUY PARTS
REQUEST QUOTE
FIND LOCATION
1500228
Call Center 24/7
LIVE CHAT 24 HOURS
CHAT VIA WEBSITE
CHAT VIA WHATSAPP
back
to top
Back to listing page

962M Z

Medium Wheel Loaders

The new 962M Z Wheel Loader has an engine equipped with a combination of proven electronic, fuel, air and aftertreatment components. Applying proven technologies systematically and strategically lets us meet our customer's high expectations for productivity, fuel efficiency, reliability and service life. Deep system integration results in reduced emissions, improved performance and improved fuel economy without interrupting machine performance making it seamless to operators. M Series Loaders are 10% more fuel efficient than the K Series Loaders and up to 25% more efficient than the H Series Loaders they replace. (Fuel efficiency is measured in mass of material moved per volume of fuel burned. Average efficiency improvement as tested and analyzed for an average composite cycle and stand configuration with variations per comparable model with and without economy mode active. Factors influence result variation such as, but not limited to, machine configuration, operator technique, machine application, climate, etc.) Optional configurations are available. (Optional configuration and equipment may vary from region to region. Consult your Caterpillar representative for further details.)

Show
Net Power - ISO 9249 186 kW
Engine Model Cat C7.1
Displacement 7 l
Maximum Net Power - 2,100 rpm - ISO 9249 186 kW
Availability Please Call Admin
Request A Quote Download Brochure
962M Z
Request A Quote

FEATURES & BENEFITS

Key Features

Benefits to help get your work done efficiently and effectively Read more

RELIABILITY, PRODUCTIVITY AND FUEL EFFICIENCY

10% more fuel efficient than K Series*Up to 25% more efficient than H Series**Fuel efficiency is measured in mass of material moved per volume of fuel burned. Average eff... Read more

Linkage and Work Tools

Performance Series buckets and range of work toolsZ-bar with best-in-class visibilityFusion™ « zero-offset » coupler (option) Read more

Engine and Aftertreatment Advancements

Cat® engine with ACERT TechnologyMeets U.S. Tier 4 Final/EU Stage IV/Korea Tier 4 emission standardsCat Clean Emissions Module with Selective Catalytic ReductionProductiv... Read more

Transmission Advancements

5-speed powershift transmission with single clutch speed shifts and torque based down shiftsLock up clutch torque converter with lock-to-lock shiftingSplit flow oil syste... Read more

Axle Advancements

On-the-go disc-type front differential locks (front and rear fully automatic option)Caliper disc parking brakeBevel gear shrouds Read more

Next Generation Hydraulic Systems

Next generation main valveNext generation ride control system with dual accumulatorsNext generation implement pump with increased displacementFull flow and kidney loop fi... Read more

EASE OF OPERATION – Best-in-class Operator Environment

Optimized all-around visibilitySteering wheel (E-H joystick steering option)Touch screen multifunction color display with integrated controls and rearview cameraStair-lik... Read more

EASE OF OPERATION – Advanced Technology with Cat Connect

Link technologies, like Product Link™ to monitor equipment and manage production using online VisionLink® softwarePayload technologies, like Cat Production Measurement (o... Read more

SPECIFICATIONS FOR 962M Z

Collapse All
Engine
Net Power - ISO 9249 186 kW
Engine Model Cat C7.1
Displacement 7 l
Maximum Net Power - 2,100 rpm - ISO 9249 186 kW
Maximum Gross Power - 2,100 rpm - ISO 14396 201 kW
Maximum Net Power - 2,100 rpm - ISO 9249 - Metric 186 kW
Peak Gross Torque - 1,350 rpm - SAE J1995 1249 N·m
Maximum Gross Power - 2,100 rpm - ISO 14396 - Metric 201 kW
Maximum Gross Power - 2,100 rpm - SAE J1995 202 kW
Peak Gross Torque - 1,350 rpm - ISO 14396 1245 N·m
Maximum Net Power - 2,100 rpm - SAE J1349 186 kW
Maximum Net Torque - 1,350 rpm 1172 N·m
Weights
Operating Weight 19211 kg
Note Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, manual diff lock/open axles (front/rear), power train guard, secondary steering, sound suppression and a 3.3 m3 (4.3 yd3) general purpose bucket with BOCE.
Buckets
Bucket Capacities 2.5-9.2 m³ (3.3-12.0 yd³)
Operating Specifications
Breakout Force 146 kN
Static Tipping Load - Full 40° Turn - With Tire Deflection 11700 kg
Static Tipping Load - Full 40° Turn - No Tire Deflection 12455 kg
Note (1) For a machine configuration as defined under ?Weight.?
Note (2) Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Transmission
Forward - 1 6.9 km/h
Forward - 2 12 km/h
Forward - 3 19.3 km/h
Forward - 4 25.7 km/h
Reverse - 1 6.9 km/h
Reverse - 2 12 km/h
Reverse - 3 25.7 km/h
Forward - 5 39.5 km/h
Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.
Hydraulic System
Implement System - Maximum Operating Pressure 27900 kPa
Implement Pump Type Variable Axial Piston
Hydraulic Cycle Time - Total 9.5 s
Implement System - Maximum Pump Output at 2,340 rpm 322 l/min
Service Refill Capacities
Cooling System 59 l
Crankcase 22 l
Transmission 43 l
Hydraulic Tank 125 l
Differential - Final Drives - Rear 43 l
DEF Tank 16 l
Differential - Final Drives - Front 43 l
Fuel Tank 275 l
Sound
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) 107 dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) 75 dB(A)*
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 70 dB(A)
Note (2) **European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.?
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008) 104 LWA**
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 69 dB(A)
Note (1) *Distance of 15 m (49.2 ft), moving forward in second gear ratio.
Dimensions - High Lift
Lift Arm Clearance at Maximum Lift 3791 mm
Rack Back - Carry Height 54 °
Note All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Rack Back - Maximum Lift 66 °
Tread Width 2140 mm
Overall Length - Without Bucket 7411 mm
Hinge Pin Height at Maximum Lift 4487 mm
Ground Clearance 362 mm
Centerline of Rear Axle to Hitch 1675 mm
Maximum Width - Over Tires - Loaded 2824 mm
Wheel Base 3350 mm
Height - Top of ROPS 3440 mm
Centerline of Rear Axle to Edge of Counterweight 2055 mm
Hinge Pin Height at Carry Height 762 mm
Height - Top of Exhaust Pipe 3408 mm
Rack Back at Ground 45 °
Height - Top of Hood 2691 mm
Bucket Capacities
Bucket Range 2.5-9.2 m³ (3.3-12.0 yd³)
Dimensions - Standard Lift
Height - Top of Hood 2694 mm
Rack Back - Maximum Lift 60 °
Centerline of Rear Axle to Hitch 1675 mm
Hinge Pin Height at Carry Height 642 mm
Hinge Pin Height at Maximum Lift 4182 mm
Overall Length - Without Bucket 7037 mm
Height - Top of ROPS 3443 mm
Tread Width 2140 mm
Rack Back - Carry Height 49 °
Wheel Base 3350 mm
Lift Arm Clearance at Maximum Lift 3624 mm
Height - Top of Exhaust Pipe 3411 mm
Centerline of Rear Axle to Edge of Counterweight 2055 mm
Maximum Width - Over Tires - Loaded 2824 mm
Ground Clearance 365 mm
Rack Back at Ground 40 °
Note All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.

SELECT MODELS TO COMPARE

Medium Wheel Loaders

972M XE

Engine Model Cat? C9.3 ACERT?
Displacement 9.3 l
Maximum Net Torque - 1,200 rpm 1618 N·m
Maximum Net Power - SAE J1349/ISO 9249 232 kW
Compare models
Medium Wheel Loaders

962G Series II

Compare models
Medium Wheel Loaders

972M (2015)

Net Power - ISO 9249 223 kW
Engine Model Cat? C9.3 ACERT?
Bore 115 mm
Stroke 149 mm
Compare models
Medium Wheel Loaders

980K

Net Power - ISO 9249 257 kW
Engine Model Cat C13
Operating Weight 30900 kg
Bucket Capacities 5.4m3
Compare models
Medium Wheel Loaders

IT62G II Integrated Toolcarrier

Compare models
Medium Wheel Loaders

962M

Engine Model Cat? C7.1 ACERT?
Bore 105 mm
Stroke 135 mm
Displacement 7.01 l
Compare models
Medium Wheel Loaders

966M XE

Bucket Capacities 2.5-9.2 m? (3.25-12.0 yd3)
Engine Model Cat? C9.3 ACERT?
Bore 115 mm
Stroke 149 mm
Compare models
Medium Wheel Loaders

962H

Net Power - ISO 9249 158 kW
Engine Model Cat? C7 ACERT?
Net Power - 80/1269/EEC 158 kW
Flywheel Power 158 kW
Compare models
of

How to buy

VIEW ALL
01
SEND REQUEST

Select your equipment and fill out your contact information

02
GET A QUOTE

A sales rep will send you an official quote and other related information

03
PAYMENT & DELIVERY

Payment – Lead time - Delivery

Select Up to
3 Models to Compare
Model 1
Model 2
Model 3
Compare Cancel