Back to listing page

910K

Compact Wheel Loaders

The Cat® 910K Compact Wheel Loader features an optimized Z-bar linkage that combines the digging efficiency of a traditional Z-bar loader with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control.

Show

Net Power 72 kW

Rated Net Power - SAE J1349 72 kW

Rated Net Power - Rated Engine Speed 2200 r/min

Maximum Gross Power - Maximum Engine Speed 2350 r/min

Availability

Please Call Admin

Request A Quote

910K

Request A Quote

OVERVIEW

Configured for Success

FEATURES & BENEFITS

High Performance

With its high full turn tipping loads and breakout forces, the K Series delivers a powerful solution for all customer applications. Read more

Ease of Operation

State of the art electro-hydraulic system provides low effort, fine control with fast cycle times. All-in-one joystick helps keep eyes on the work. Operator can adjust ma... Read more

Parallel Lift Loader Linkage

The Cat® Optimized Z-bar Loader linkage combines the digging efficiency of a traditional Z-bar with tool carrier capabilities for great performance and versatility. With... Read more

SPECIFICATIONS FOR 910K

Collapse All

Engine

Net Power	72 kW
Rated Net Power - SAE J1349	72 kW
Rated Net Power - Rated Engine Speed	2200 r/min
Maximum Gross Power - Maximum Engine Speed	2350 r/min
Maximum Gross Power - ISO 14396	74 kW
Maximum Gross Power - ISO 14396 (DIN)	74 kW
Maximum Gross Power - SAE J1995	76 kW
Engine Model	Cat C4.4
Maximum Gross Power	100 kW
Stroke	127 mm
Rated Net Power - ISO 9249	72 kW
Rated Net Power - ISO 9249 (DIN)	72 kW
Displacement	4.4 l
Maximum Gross Torque - SAE J1995	455 N·m
Emissions	Engine meets U.S. EPA Tier 3/EU Stage IIIA emission standards.
Bore	105 mm
Maximum Gross Torque - ISO 14396	450 N·m
Note	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.

Weights

Operating Weight

7492 kg

Service Refill Capacities

Cooling System	21.5 l
Fuel Tank	154 l
Hydraulic System - Including Tank	98 l
Engine Crankcase	8.8 l
Transmission	3.4 l
Hydraulic Tank	55 l
Axles - Front Center Differential	7.5 l
Axles - Rear Center Differential	7.5 l

Operating Specifications

Rated Bucket Capacity

1.9 m³

Buckets

Bucket Capacities

1.3-1.9 m3 (1.7-2.5 yd3)

Cab

ROPS	ISO 3471:2008
FOPS	ISO 3449:2005 Level II
Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
Note (4)	*The measurements were conducted with the cab doors and windows closed.
Note (3)	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).

Loader Hydraulic System

Maximum Flow - Implement Pump - 3rd Function, Maximum Flow	90 l/min
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure	21000 kPa
Hydraulic Cycle Time - Total Cycle Time	12.5 s
Maximum Flow - Implement Pump	122 l/min
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	5.2 s
Maximum Flow - Implement Pump - 4th Function, Maximum Flow	90 l/min
Relief Pressure - Tilt Cylinder	34000 kPa
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	3.7 s
Hydraulic Cycle Time - Rackback	2.2 s
Hydraulic Cycle Time - Dump, at Maximum Reach	1.4 s
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure	21000 kPa
Maximum Working Pressure - Implement Pump	23500 kPa

Axles

Front	Fixed; Locking differential (standard)
Rear	Oscillating ï¿½11 degrees; Locking differential (Standard)

Transmission

Forward and Reverse - Low Range, Speed Range 1*	10 km/h
Forward and Reverse - Low Range, Speed Range 2*	20 km/h
Note	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.

Steering

Maximum Flow - Steering Pump	66 l/min
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed	3.2 s
Steering Articulation Angle - Each Direction	40 °
Maximum Working Pressure - Steering Pump	18500 kPa
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	3.75 turns

Tires

Note (1)	Other tire choices are available. Contact your Cat dealer for details.
Standard Size	15.5-25 12PR
Note (2)	In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
Note (3)	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Other Choices Include	15.5-R25; 17.5-25 12PR; 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexportï¿½