Engine
Engine Model |
Cat C32 |
Bore |
145 mm |
Stroke |
162 mm |
Displacement |
32.1 l |
Engine Power - ISO 14396 |
749 kW |
Net Torque - 1,300 rpm |
4757 N·m |
Note (2) |
Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F). |
Gross Power - SAE J1995 |
758 kW |
Engine Speed |
1750 r/min |
Net Torque Rise |
23% |
Net Power - SAE J1349 |
708 kW |
Note (1) |
Power rating applies at 1,750 rpm when tested under the specified condition for the specified standard. |
Cylinders |
12 |
Emissions (2) |
Certified for China Nonroad Stage III emission standards. |
Emissions (1) |
Meets U.S. EPA Tier 2 Equivalent emission standards. |
Note (3) |
No engine derating required up to 3048 m (10,000 ft) altitude. |
Operating Specifications
Nominal Payload Class (100%) |
92.6 ton (US) |
Top Speed - Loaded |
65.9 km/h |
Maximum Payload Class (110%) |
98.2 ton (US) |
Transmission
Forward - 1 |
10.7 km/h |
Forward - 3 |
19.8 km/h |
Forward - 5 |
36.2 km/h |
Forward - 7 |
65.9 km/h |
Note |
Maximum travel speeds with standard 27.00R49 (E4) tires. |
Reverse - 1 |
12.1 km/h |
Final Drives
Differential Ratio |
2.74:1 |
Planetary Ratio |
7.00:1 |
Total Reduction Ratio |
19.16:1 |
Brakes
Brake Surface Area - Front Caliper |
2787 cm² |
Brake Surface Area - Front OCDB |
40846 cm² |
Brake Standards |
ISO 3450:2011 |
Brake Surface Area - Rear |
102116 cm² |
Body Hoists
Body Raise Time - High Idle |
15 s |
Pump Flow - High Idle |
491 l/min |
Capacity - Dual Slope - 100% Fill Factor
Struck |
42.1 m³ |
Heaped 2:1 (SAE) |
60.1 m³ |
Weight Distributions - Approximate
Front Axle - Empty/Loaded |
44%/30% |
Rear Axle - Empty/Loaded |
56%/70% |
Suspension
Effective Cylinder Stroke - Front |
318 mm |
Effective Cylinder Stroke - Rear |
165 mm |
Rear axle - Oscillation |
5.4° |
Service Refill Capacities
Fuel Tank |
1140 l |
Cooling System |
212 l |
Differentials |
222 l |
Crankcase |
113.5 l |
Final Drive - Each |
42 l |
Torque Converter - Brake - Hoist Hydraulic Tank |
385 l |
Steering System - Includes Tank |
59 l |
Transmission System |
122 l |
Tires
Standard Tire |
27.00R49 (E4) |
Note (2) |
Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection. |
Note (1) |
Productive capabilities of the 777E truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production. |
ROPS
ROPS |
ROPS (Rollover Protective Structure) cab offered by Caterpillar meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. |
FOPS |
FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 for Operator and ISO 13459:2012 Level II FOPS criteria for Trainer. |
Sound
Sound Standards |
ISO 6393:2008, SAE J1166:2008 |
Note (1) |
The operator sound exposure Leq (equivalent sound pressure level) measured according to work cycle procedures specified in SAE J1166:2008 is 80 dB(A) for cab offered by Caterpillar, when properly installed and maintained and tested with doors and windows closed. |
Note (2) |
The dynamic operator sound pressure level is 80 dB(A) as per ISO 6396:2008 for cab offered by Caterpillar. When properly installed and maintained and tested with doors and windows closed. |
Steering
Turning Diameter - Front |
25.3 m |
Steering Standards |
ISO 5010:2007 |
Steer Angle |
30.5° |
Turning Circle - Clearance Diameter |
28.4 m |
Note |
Separate hydraulic system prevents cross-contamination. |
Capacity - X Body - 100% Fill Factor
Struck |
43.1 m³ |
Heaped 2:1 (SAE) |
64.1 m³ |
Dimensions (Approximate) - Dual Slope
Overall Canopy Width |
6200 mm |
Operating Width - Extended Catwalk |
6545 mm |
Centerline of Rear Dual Tire Width |
3576 mm |
Overall Body Length |
9555 mm |
Overall Height - Body Raised |
9953 mm |
Outside Body Width |
5524 mm |
Wheel Base |
4570 mm |
Inside Body Depth - Maximum |
1895 mm |
Overall Front Tire Width |
4961 mm |
Overall Length |
10004 mm |
Dump Clearance |
890 mm |
Ground Clearance |
896 mm |
Rear Axle - Tail |
3045 mm |
Height - Top of ROPS - Loaded |
4730 mm |
Centerline Front Tire Width |
4163 mm |
Inside Body Length |
6920 mm |
Engine Guard Clearance |
864 mm |
Inside Body Width |
5200 mm |
Rear Axle - Clearance |
902 mm |
Loading Height - Empty |
4380 mm |
Front Canopy Height - Loaded |
5177 mm |
Overall Tire Width |
5262 mm |
Operating Width |
6105 mm |
Dimensions (Approximate) - X Body
Overall Canopy Width |
6200 mm |
Centerline Front Tire Width |
4163 mm |
Dump Clearance |
818 mm |
Operating Width - Extended Catwalk |
6545 mm |
Overall Body Length |
10070 mm |
Overall Tire Width |
5262 mm |
Front Canopy Height - Loaded |
5370 mm |
Inside Body Depth - Maximum |
1777 mm |
Overall Length |
10230 mm |
Wheel Base |
4570 mm |
Inside Body Width |
5450 mm |
Inside Body Length |
7186 mm |
Overall Front Tire Width |
4961 mm |
Loading Height - Empty |
4430 mm |
Rear Axle - Clearance |
902 mm |
Engine Guard Clearance |
864 mm |
Height - Top of ROPS - Loaded |
4730 mm |
Overall Height - Body Raised |
10071 mm |
Rear Axle - Tail |
3263 mm |
Operating Width |
6105 mm |
Ground Clearance |
896 mm |
Centerline of Rear Dual Tire Width |
3576 mm |
Outside Body Width |
5689 mm |
Weights - Dual Slope - With Liner
Empty Operating Weight |
70753 kg |
Target Gross Machine Weight |
163360 kg |
Target Payload |
92607 kg |
Body System Weight |
16070 kg |
Weights - X Body - Without Liner
Empty Operating Weight |
64988 kg |
Target Gross Machine Weight |
163360 kg |
Body System Weight |
15900 kg |
Target Payload |
98372 kg |
Weights - X Body - With Liner
Target Payload |
93686 kg |
Body System Weight |
15900 kg |
Empty Operating Weight |
69674 kg |
Target Gross Machine Weight |
163360 kg |
Weights - Dual Slope - Without Liner
Body System Weight |
16070 kg |
Empty Operating Weight |
65158 kg |
Target Gross Machine Weight |
163360 kg |
Target Payload |
98202 kg |