Back to listing page

395 - Tier 4

Large Excavators

The Cat 395 gets every job done every time. A 10% higher digging force eases bucket penetration to reduce digging cycle time in the most demanding applications. With up to a 15% higher payload and the ability to carry the SD6.5m3 bucket, this mass excavator can load a 70-ton off-road truck in 5-6 passes. For deep trenching work, the 395 digs down deep with maximum digging depths from 7190mm (23’7” ft) up to 11 710 (38’5” ft). The 395 is built for extreme durability with 2x reinforced booms, sticks, upper and lower frames. Reduced hydraulic oil capacity, improved filters with longer service intervals, and an integrated auto-lube-ready system save you up to 20% in maintenance costs. Equipped with the latest technology and data, the 395 helps you make informed and smart decisions to improve efficiency, increase productivity, and enhance safety.

Show

Net Power - ISO 9249 404 kW

Engine Model Cat C18

Engine Power - ISO 14396 405 kW

Bore 145 mm

Availability

Please Call Admin

Request A Quote Download Brochure

395 - Tier 4

Request A Quote

OVERVIEW

Greater Production. Reinforced Durability. Less Maintenance.

FEATURES & BENEFITS

Latest Features

    Cab Monitor Improvements     Continuously improved user interface allows intuitive navigation, minimizing performance inte... Read more

High Performance

    The 395 is up to 10% more productive than the 390F it replaces.     Work up to 3000 m (9,840 ft) above sea level without... Read more

Efficiency Through Technology

    Boost productivity up to 45% versus traditional grading with standard Cat® Grade with 2D system – includes indicate-only and laser capability. &n... Read more

Take the Guesswork Out of Managing Your Equipment

    VisionLink® provides actionable data insights for all assets - regardless of fleet size or equipment manufacturer. * Review equipment data from y... Read more

Less Maintenance

    Expect up to 20% less maintenance cost than the 390F due to reduced hydraulic oil capacity and extended and synchronized service intervals. &nbsp... Read more

Work In Comfort

    Two cab options – Deluxe, and Premium – let you choose the level of comfort you need.     Stay warm with the Deluxe heated se... Read more

Enhanced Safety

    Keep your excavator secure with Operator ID. Use your PIN code on the monitor to enable the pushbutton starting feature.     ... Read more

Simple to Operate

    Start the engine with a push button; use a Bluetooth key fob or the unique Operator ID function.     Automatic hydraulic oil... Read more

Sustainability

    The Cat® C18 engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V and Japan 2014 emission standards.     Cat® diesel... Read more

SPECIFICATIONS FOR 395 - Tier 4

Collapse All

Engine

Net Power - ISO 9249	404 kW
Engine Model	Cat C18
Engine Power - ISO 14396	405 kW
Bore	145 mm
Stroke	183 mm
Displacement	18.1 l
Net Power - ISO 9249 (DIN)	550 hp (metric)
Biodiesel Capability	B20¹
Emissions	Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of manufacture.
Note (1)	Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
Note (2)	¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

Hydraulic System

Main System - Maximum Flow - Implement	1064 l/min
Maximum Pressure - Equipment	37000 kPa
Maximum Pressure - Travel	35000 kPa
Maximum Pressure - Swing	31000 kPa

Swing Mechanism

Swing Speed	6.26 r/min
Maximum Swing Torque	362 kN·m

Weights

Operating Weight	94000 kg
Note (1)	Long Variable Gauge undercarriage, GP boom, R4.4HB2 (14'5") stick, SD 5.2 m³ (6.8 yd³) bucket, 900 mm (35") double grouser shoes and counterweight with removal device.

Service Refill Capacities

Fuel Tank Capacity	1220 l
Cooling System	71 l
Engine Oil	67 l
Swing Drive	24 l
Final Drive - Each	20 l
Hydraulic System - Including Tank	740 l
Hydraulic Tank	372 l
DEF Tank	80 l

Dimensions

Boom	GP 8.4m (25'7")
Stick	R4.4m (14'5")
Bucket	SD 5.2m³ (6.8 yd³)
Shipping Height - Top of Cab	3670 mm
Handrail Height	3750 mm
Shipping Length	15090 mm
Tail Swing Radius	4840 mm
Counterweight Clearance	1640 mm
Ground Clearance	830 mm
Track Length	20.1 ft
Track Length to Center of Rollers	5120 mm
Track Gauge	3510 mm
Transport Width	3880 mm
Note	Track gauge undercarriage extended with 900 mm (35") shoes; transport width undercarriage retracted with 900 mm (35") shoes and no steps

Working Ranges & Forces

Maximum Digging Depth	9670 mm
Boom	GP 8.4m (25'7")
Stick	R4.4m (14'5")
Bucket	SD 5.2m³ (6.8 yd³)
Maximum Reach at Ground Level	14710 mm
Maximum Cutting Height	13540 mm
Maximum Loading Height	9250 mm
Minimum Loading Height	3030 mm
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom	9560 mm
Maximum Vertical Wall Digging Depth	6770 mm
Bucket Digging Force - ISO	383 kN
Stick Digging Force - ISO	305 kN

Sustainability

Recyclability

98%

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons).