MENU
ID
EN ID
BELI PARTS
REQUEST QUOTE
Temukan Lokasi
1500228
Call Center 24/7
LIVE CHAT 24 HOURS
CHAT VIA WEBSITE
CHAT VIA WHATSAPP
back
to top
Back to listing page

950M (TIER 4/STAGE IV) (2016)

Medium Wheel Loaders

The new 950M Wheel Loader has a U.S. EPA Tier 4 Final/EU Stage IV ACERT™ engine equipped with a combination of proven electronic, fuel, air and aftertreatment components. Applying proven technologies systematically and strategically lets us meet our customer's high expectations for productivity, fuel efficiency, reliability and service life. Deep system integration results in reduced emissions, improved performance and improved fuel economy without interrupting machine performance making it seamless to operators. M Series Loaders are 10% more fuel efficient than the K Series Loaders and up to 25% more efficient than the H Series Loaders they replace. (Fuel efficiency is measured in mass of material moved per volume of fuel burned. Average efficiency improvement as tested and analyzed for an average composite cycle and stand configuration with variations per comparable model with and without economy mode active. Factors influence result variation such as, but not limited to, machine configuration, operator technique, machine application, climate, etc.) Optional configurations are available. (Optional configuration and equipment may vary from region to region. Consult your Caterpillar representative for further details.)

Show
Engine Model Cat C7.1 ACERT
Displacement 7.01 l
Net Power - ISO 9249 171 kW
Peak Gross Torque - 1,300 rpm - SAE J1995 1235 N·m
Availability Please Call Admin
Request A Quote Download Brochure
950M (TIER 4/STAGE IV) (2016)
Request A Quote

FEATURES & BENEFITS

Key Features

Benefits to help get your work done efficiently and effectively Read more

RELIABILITY, PRODUCTIVITY AND FUEL EFFICIENCY

10% more fuel efficient than K Series*Up to 25% more efficient than H Series**Fuel efficiency is measured in mass of material moved per volume of fuel burned. Average eff... Read more

Linkage and Work Tools

Performance Series buckets and range of work toolsOptimized Z-bar with best-in-class visibility–0°/+5° parallelismIncreased tilt capacity at height, equal to payloadFusio... Read more

Engine and Aftertreatment Advancements

Cat® C7.1 engineMeets Tier 4 Final/Stage IV emission standardsCat Clean Emissions Module with Selective Catalytic ReductionProductive Economy Mode Read more

Transmission Advancements

5-speed powershift transmission with single clutch speed shifts and torque based down shiftsLock up clutch torque converter with lock-to-lock shiftingSplit flow oil syste... Read more

Axle Advancements

On-the-go disc-type front differential locks (front and rear fully automatic option)Caliper disc parking brakeBevel gear shrouds Read more

Next Generation Hydraulic Systems

Next generation main valveNext generation ride control system with dual accumulatorsNext generation implement pump with increased displacementFull flow and kidney loop fi... Read more

EASE OF OPERATION – Best-in-class Operator Environment

Optimized all-around visibilitySteering wheel (E-H joystick steering option)Touch screen multifunction color display with integrated controls and rearview cameraStair-lik... Read more

EASE OF OPERATION – Advanced Technology with Cat Connect

Link technologies, like Product Link™ to monitor equipment and manage production using online VisionLink® softwarePayload technologies, like Cat Production Measurement (o... Read more

SPECIFICATIONS FOR 950M (TIER 4/STAGE IV) (2016)

Collapse All
Engine
Engine Model Cat C7.1 ACERT
Displacement 7.01 l
Net Power - ISO 9249 171 kW
Peak Gross Torque - 1,300 rpm - SAE J1995 1235 N·m
Peak Gross Torque - 1,300 rpm - ISO 14396 1231 N·m
Maximum Net Power - 2,100 rpm - ISO 9249 - Metric 171 kW
Maximum Gross Power - 2,100 rpm - SAE J1995 187 kW
Maximum Net Power - 2,100 rpm - ISO 9249 171 kW
Maximum Gross Power - 2,100 rpm - ISO 14396 - Metric 186 kW
Maximum Gross Power - 2,100 rpm - ISO 14396 186 kW
Maximum Net Power - 2,100 rpm - SAE J1349 171 kW
Maximum Net Torque - 1,300 rpm 1163 N·m
Weights
Operating Weight 19213 kg
Note Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, manual diff lock/open axles (front/rear), power train guard, secondary steering, sound suppression and a 3.1 m3 (4.1 yd3) general purpose bucket with BOCE.
Buckets
Bucket Capacities 2.5-9.2 m? (3.3-12.0 yd?)
Operating Specifications
Breakout Force 181 kN
Static Tipping Load - Full 40° Turn - With Tire Deflection 11005 kg
Static Tipping Load - Full 40° Turn - No Tire Deflection 11760 kg
Note (2) Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Note (1) For a machine configuration as defined under ?Weight.?
Transmission
Forward - 1 6.9 km/h
Forward - 2 12 km/h
Forward - 3 19.3 km/h
Forward - 4 25.7 km/h
Reverse - 1 6.9 km/h
Reverse - 2 12 km/h
Reverse - 3 25.7 km/h
Forward - 5 39.5 km/h
Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.
Hydraulic System
Hydraulic Cycle Time - Total 8.9 s
Implement System - Maximum Operating Pressure 29300 kPa
Implement System - Maximum Pump Output at 2,150 rpm 286 l/min
Implement Pump Type Variable Axial Piston
Service Refill Capacities
Fuel Tank 275 l
Hydraulic Tank 125 l
Transmission 43 l
Crankcase 22 l
Cooling System 59 l
Differential - Final Drives - Front 43 l
Differential - Final Drives - Rear 43 l
DEF Tank 16 l
Sound
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) 75 dB(A)*
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 70 dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) 108 dB(A)
Note (2) **European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.?
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008) 106 LWA**
Note (1) *Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 69 dB(A)
Dimensions - High Lift
Note All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Wheel Base 3350 mm
Height - Top of ROPS 3451 mm
Tread Width 2140 mm
Height - Top of Hood 2697 mm
Lift Arm Clearance at Maximum Lift 3634 mm
Hinge Pin Height at Carry Height 782 mm
Maximum Width - Over Tires - Loaded 2822 mm
Centerline of Rear Axle to Edge of Counterweight 1942 mm
Centerline of Rear Axle to Hitch 1675 mm
Ground Clearance 367 mm
Overall Length - Without Bucket 7488 mm
Height - Top of Exhaust Pipe 3413 mm
Rack Back - Carry Height 49 degrees
Rack Back - Maximum Lift 59 degrees
Hinge Pin Height at Maximum Lift 4527 mm
Rack Back at Ground 40 degrees
Dimensions - Standard Lift
Lift Arm Clearance at Maximum Lift 3280 mm
Height - Top of Hood 2697 mm
Rack Back - Carry Height 49 degrees
Hinge Pin Height at Maximum Lift 4027 mm
Height - Top of ROPS 3451 mm
Hinge Pin Height at Carry Height 647 mm
Overall Length - Without Bucket 6906 mm
Centerline of Rear Axle to Edge of Counterweight 1942 mm
Height - Top of Exhaust Pipe 3413 mm
Ground Clearance 367 mm
Tread Width 2140 mm
Wheel Base 3350 mm
Maximum Width - Over Tires - Loaded 2822 mm
Rack Back at Ground 36 degrees
Centerline of Rear Axle to Hitch 1675 mm
Rack Back - Maximum Lift 59 degrees
Note All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Bucket Capacities
Bucket Range 2.5-9.2 m? (3.3-12.0 yd?)

SELECT MODELS TO COMPARE

Medium Wheel Loaders

980H

Daya Bersih - ISO 9249 260 kW
Model Engine C15 ACERT
Daya Kotor - SAE J1995 293 kW
Kapasitas Bucket 4.5-6.1 m3
Compare models
Medium Wheel Loaders

962K

Net Power - ISO 9249 165 kW
Engine Model Cat? C7.1 ACERT?
Bore 105 mm
Stroke 135 mm
Compare models
Medium Wheel Loaders

966M

Net Power - ISO 9249 206 kW
Emissions Tier 4/Stage IV
Maximum Net Power - 1,700 rpm - SAE J1349 206 kW
Maximum Power - 1,800 rpm - SAE J1995 - Metric 232 kW
Compare models
Medium Wheel Loaders

950K

Net Power - ISO 9249 157 kW
Engine Model Cat? C7.1 ACERT?
Bore 105 mm
Stroke 135 mm
Compare models
Medium Wheel Loaders

980K

Engine Model Cat? C13 ACERT?
Bore 130 mm²
Stroke 157 mm²
Displacement 12.5 l
Compare models
Medium Wheel Loaders

962H

Daya Bersih - ISO 9249 157 kW
Model Engine Cat® C7 ACERT™
Daya Bersih - 80/1269/EEC 158 kW
Torsi Puncak (Bersih) @ 1400 rpm 907 N·m
Compare models
Medium Wheel Loaders

950 GC

Emissions Tier 4/Stage IV
With Cooling Fan Speed at 70% of Maximum Value: Note (2) European Union Directive "2000/14/EC" as amended by "2005/88/EC."
With Cooling Fan Speed at 70% of Maximum Value: Note (1) For machines in European Union countries and in countries that adopt the EU Directives
Net Power - ISO 9249 168 kW
Compare models
Medium Wheel Loaders

972K

Net Power - ISO 9249 215 kW
Engine Model Cat? C9.3 ACERT?
Bore 115 mm²
Stroke 149 mm²
Compare models
of

How to buy

VIEW ALL
01
SEND REQUEST

Select your equipment and fill out your contact information

02
GET A QUOTE

A sales rep will send you an official quote and other related information

03
DELIVERY & PAYMENT

Payment – Lead time - Delivery

Select Up to
3 Models to Compare
Model 1
Model 2
Model 3
Compare Cancel