MENU
ID
EN ID
BELI PARTS
REQUEST QUOTE
Temukan Lokasi
1500228
Call Center 24/7
LIVE CHAT 24 HOURS
CHAT VIA WEBSITE
CHAT VIA WHATSAPP
back
to top
Back to listing page

950M (TIER 4/STAGE IV) (2016)

Medium Wheel Loaders

The new 950M Wheel Loader has a U.S. EPA Tier 4 Final/EU Stage IV ACERT™ engine equipped with a combination of proven electronic, fuel, air and aftertreatment components. Applying proven technologies systematically and strategically lets us meet our customer's high expectations for productivity, fuel efficiency, reliability and service life. Deep system integration results in reduced emissions, improved performance and improved fuel economy without interrupting machine performance making it seamless to operators. M Series Loaders are 10% more fuel efficient than the K Series Loaders and up to 25% more efficient than the H Series Loaders they replace. (Fuel efficiency is measured in mass of material moved per volume of fuel burned. Average efficiency improvement as tested and analyzed for an average composite cycle and stand configuration with variations per comparable model with and without economy mode active. Factors influence result variation such as, but not limited to, machine configuration, operator technique, machine application, climate, etc.) Optional configurations are available. (Optional configuration and equipment may vary from region to region. Consult your Caterpillar representative for further details.)

Show
Engine Model Cat C7.1 ACERT
Displacement 7.01 l
Maximum Gross Power - 2,100 rpm - ISO 14396 - Metric 186 kW
Maximum Net Power - 2,100 rpm - ISO 9249 171 kW
Availability Please Call Admin
Request A Quote Download Brochure
950M (TIER 4/STAGE IV) (2016)
Request A Quote

FEATURES & BENEFITS

RELIABILITY, PRODUCTIVITY AND FUEL EFFICIENCY

10% more fuel efficient than K Series*Up to 25% more efficient than H Series**Fuel efficiency is measured in mass of material moved per volume of fuel burned. Average eff... Read more

Linkage and Work Tools

Performance Series buckets and range of work toolsOptimized Z-bar with best-in-class visibility–0°/+5° parallelismIncreased tilt capacity at height, equal to payloadFusio... Read more

Engine and Aftertreatment Advancements

Cat® C7.1 engineMeets Tier 4 Final/Stage IV emission standardsCat Clean Emissions Module with Selective Catalytic ReductionProductive Economy Mode Read more

Transmission Advancements

5-speed powershift transmission with single clutch speed shifts and torque based down shiftsLock up clutch torque converter with lock-to-lock shiftingSplit flow oil syste... Read more

Axle Advancements

On-the-go disc-type front differential locks (front and rear fully automatic option)Caliper disc parking brakeBevel gear shrouds Read more

Next Generation Hydraulic Systems

Next generation main valveNext generation ride control system with dual accumulatorsNext generation implement pump with increased displacementFull flow and kidney loop fi... Read more

EASE OF OPERATION – Best-in-class Operator Environment

Optimized all-around visibilitySteering wheel (E-H joystick steering option)Touch screen multifunction color display with integrated controls and rearview cameraStair-lik... Read more

EASE OF OPERATION – Advanced Technology with Cat Connect

Link technologies, like Product Link™ to monitor equipment and manage production using online VisionLink® softwarePayload technologies, like Cat Production Measurement (o... Read more

SERVICE ACCESS

One-piece tilting hood with side and rear doorsCentralized service centers for hydraulic and electrical componentsWindshield cleaning platform and harness tie-off Read more

SPECIFICATIONS FOR 950M (TIER 4/STAGE IV) (2016)

Collapse All
Engine
Engine Model Cat C7.1 ACERT
Displacement 7.01 l
Maximum Gross Power - 2,100 rpm - ISO 14396 - Metric 186 kW
Maximum Net Power - 2,100 rpm - ISO 9249 171 kW
Maximum Net Power - 2,100 rpm - SAE J1349 171 kW
Peak Gross Torque - 1,300 rpm - SAE J1995 1235 N·m
Maximum Gross Power - 2,100 rpm - SAE J1995 187 kW
Peak Gross Torque - 1,300 rpm - ISO 14396 1231 N·m
Maximum Net Power - 2,100 rpm - ISO 9249 - Metric 171 kW
Maximum Gross Power - 2,100 rpm - ISO 14396 186 kW
Net Power - ISO 9249 171 kW
Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
Maximum Net Torque - 1,300 rpm 1163 N·m
Weights
Operating Weight 19213 kg
Note Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, manual diff lock/open axles (front/rear), power train guard, secondary steering, sound suppression and a 3.1 m3 (4.1 yd3) general purpose bucket with BOCE.
Buckets
Bucket Capacities 2.5-9.2 m? (3.3-12.0 yd?)
Operating Specifications
Breakout Force 181 kN
Static Tipping Load - Full 40° Turn - With Tire Deflection 11005 kg
Static Tipping Load - Full 40° Turn - No Tire Deflection 11760 kg
Note (1) For a machine configuration as defined under ?Weight.?
Note (2) Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Transmission
Forward - 1 6.9 km/h
Forward - 2 12 km/h
Forward - 3 19.3 km/h
Forward - 4 25.7 km/h
Reverse - 1 6.9 km/h
Reverse - 2 12 km/h
Reverse - 3 25.7 km/h
Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.
Forward - 5 39.5 km/h
Hydraulic System
Implement System - Maximum Pump Output at 2,150 rpm 286 l/min
Hydraulic Cycle Time - Total 8.9 s
Implement System - Maximum Operating Pressure 29300 kPa
Implement Pump Type Variable Axial Piston
Service Refill Capacities
Transmission 43 l
Crankcase 22 l
Fuel Tank 275 l
Cooling System 59 l
Differential - Final Drives - Rear 43 l
DEF Tank 16 l
Differential - Final Drives - Front 43 l
Hydraulic Tank 125 l
Sound
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 70 dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) 108 dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) 75 dB(A)*
Note (1) *Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 69 dB(A)
Note (2) **European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.?
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008) 106 LWA**
Dimensions - High Lift
Height - Top of ROPS 3451 mm
Height - Top of Exhaust Pipe 3413 mm
Hinge Pin Height at Carry Height 782 mm
Note All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Tread Width 2140 mm
Wheel Base 3350 mm
Centerline of Rear Axle to Edge of Counterweight 1942 mm
Overall Length - Without Bucket 7488 mm
Lift Arm Clearance at Maximum Lift 3634 mm
Hinge Pin Height at Maximum Lift 4527 mm
Height - Top of Hood 2697 mm
Rack Back - Carry Height 49 degrees
Ground Clearance 367 mm
Maximum Width - Over Tires - Loaded 2822 mm
Rack Back at Ground 40 degrees
Rack Back - Maximum Lift 59 degrees
Centerline of Rear Axle to Hitch 1675 mm
Dimensions - Standard Lift
Lift Arm Clearance at Maximum Lift 3280 mm
Ground Clearance 367 mm
Hinge Pin Height at Carry Height 647 mm
Rack Back - Carry Height 49 degrees
Rack Back - Maximum Lift 59 degrees
Height - Top of ROPS 3451 mm
Maximum Width - Over Tires - Loaded 2822 mm
Note All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Overall Length - Without Bucket 6906 mm
Height - Top of Hood 2697 mm
Hinge Pin Height at Maximum Lift 4027 mm
Wheel Base 3350 mm
Centerline of Rear Axle to Hitch 1675 mm
Centerline of Rear Axle to Edge of Counterweight 1942 mm
Height - Top of Exhaust Pipe 3413 mm
Tread Width 2140 mm
Rack Back at Ground 36 degrees
Bucket Capacities
Bucket Range 2.5-9.2 m? (3.3-12.0 yd?)

SELECT MODELS TO COMPARE

Medium Wheel Loaders

IT38H

Net Power - ISO 9249 134 kW
Engine Model C6.6 ACERT
Gross Power - SAE J1995 147 kW
Peak Torque - 1,400 rpm - Net 840 N·m
Compare models
Medium Wheel Loaders

950K

Net Power - ISO 9249 157 kW
Engine Model Cat? C7.1 ACERT?
Bore 105 mm
Stroke 135 mm
Compare models
Medium Wheel Loaders

980

Model Engine C13 Cat
Catatan (1) Engine Cat memenuhi standar emisi Brasil MAR-1, yang setara dengan EPA Tier 3 AS, Stage IIIA UE, dan Non-Jalan Raya Stage III China.
Catatan (2) Daya bersih yang dinyatakan adalah daya yang tersedia pada flywheel apabila engine dilengkapi dengan kipas, alternator, air cleaner, dan aftertreatment.
Bobot Kerja 30344 kg
Compare models
Medium Wheel Loaders

962M Z

Net Power - ISO 9249 186 kW
Engine Model Cat C7.1
Displacement 7 l
Maximum Net Power - 2,100 rpm - ISO 9249 186 kW
Compare models
Medium Wheel Loaders

972K

Net Power - ISO 9249 215 kW
Engine Model Cat? C9.3 ACERT?
Bore 115 mm
Stroke 149 mm
Compare models
Medium Wheel Loaders

962M

Net Power - ISO 9249 186 kW
Engine Model Cat? C7.1 ACERT?
Bore 105 mm
Stroke 135 mm
Compare models
Medium Wheel Loaders

IT38G

Net Power - ISO 9249 119 kW
Engine Model Cat? 3126 DITA
Net Power - 80/1269/EEC 119 kW
Flywheel Power 119 kW
Compare models
Medium Wheel Loaders

972G

Compare models
of

How to buy

VIEW ALL
01
SEND REQUEST

Select your equipment and fill out your contact information

02
GET A QUOTE

A sales rep will send you an official quote and other related information

03
DELIVERY & PAYMENT

Payment – Lead time - Delivery

Select Up to
3 Models to Compare
Model 1
Model 2
Model 3
Compare Cancel