Back to listing page

910K

Compact Wheel Loaders

The Cat 910K Compact Wheel Loader sets a new standard for productivity, fuel efficiency and comfort. On-the-go operator tuned hydraulics and drivetrain adjust the machine's response to the task at hand. Low sound levels, large spacious cab and intuitive controls keep you working comfortably all day long. The new Cat Optimized Z-bar Loader linkage delivers the performance and breakout forces of a traditional Z-bar linkage with the parallelism and load handling capability of a tool carrier. Experience the new industry benchmark.

Show

Net Power 70 kW

Displacement 3.8 l

Rated Net Power - SAE J1349 69 kW

Note Engine meets U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards.

Availability

Please Call Admin

Request A Quote

910K

Request A Quote

FEATURES & BENEFITS

SPECIFICATIONS FOR 910K

Collapse All

Engine

Net Power	70 kW
Displacement	3.8 l
Rated Net Power - SAE J1349	69 kW
Note	Engine meets U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards.
Rated Torque	321 N·m
Rated Net Power - ISO 9249/EEC	70 kW
RPM at Rated Power	2400 r/min
RPM at Peak Torque	1500 r/min
Torque Rise	17 %
Peak Torque	336 N·m
Maximum Gross Power - SAE J1995	73 kW
Maximum Gross Power - ISO 14396	72 kW
Bore	100 mm
Stroke	120 mm
Engine Model	Catï¿½ C3.8 Turbo
Maximum Gross Power	72 kW

Buckets

Bucket Capacities	1.2 m3-2.5 m3 (1.6 yd3-3.3 yd3)
General Purpose	1.2-1.5 m3 (1.6-2.0 yd3)
Type	Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention.

Weights

Operating Weight	7130 kg
Operating Weight - High Lift	7639 kg
Operating Weight - Standard Lift	7130 kg

Steering

Steering Cycle Times - Stop to Stop - At 2,400 rpm Engine Speed, 90 rpm Steering Wheel Speed	3.2 s
Steering Cylinder, Double Acting - Bore Diameter	60 mm
Maximum Flow - Steering Pump	60 l/min
Steering Cylinder, Double Acting - Stroke	400 mm
Maximum Steering Torque - 0° (Straight Machine)	29818 N·m
Maximum Working Pressure - Steering Pump	18500 kPa
Steering Cylinder, Double Acting - Rod Diameter	35 mm
Maximum Steering Torque - 39° (Full Turn)	23525 N·m
Number of Steering Wheel Turns - Stop to Stop, Turning Wheel at > 67 rpm	3.75 turns
Steering Articulation Angle - Each Direction	40 °
Type	Steering system uses a dedicated pump with dual double acting cylinders.
Number of Steering Wheel Turns - Stop to Stop, Turning Wheel at < 27 rpm	5.75 turns

Loader Hydraulic System

Maximum Working Pressure - Implement Pump	210 bar
Main Relief Pressure	246 bar
Cycle Time - Dump	2 s
Maximum Flow - Implement Pump - 3rd Function	95 l/min
Maximum Pump Flow	100 l/min
Maximum Flow - Implement Pump - 4th Function	95 l/min
Tilt Cylinder - Stroke	578 mm
Tilt Cylinder - Rod Diameter	60 mm
Lift Cylinder - Bore Diameter	100 mm
Cycle time - Rackback	3 s
Cycle time - Float	4.1 s
Tilt Cylinder - Bore Diameter	100 mm
Cycle Time - Lower, Float	4.4 s
Lift cylinders - Stroke	593 mm
Cycle Time - Lift	5.9 s
Lift Cylinder - Rod Diameter	60 mm

Service Refill Capacities

Cooling System	16.5 l
Fuel Tank	150 l
Hydraulic System	85 l
Transmission - Gear Box	3.2 l
Hydraulic Tank - Refill	60 l
Axle - Front, Each Hub	2.2 l
Axle - Rear, Center	7.5 l
Engine Crankcase	13 l
Axle - Rear, Each Hub	2.2 l
Axle - Front, Center	7.5 l

Transmission

Reverse - Low Range, Speed Range 1	10 km/h
Reverse - High Range	40 km/h
Forward - High Range	40 km/h
Type (1)	Changing from Low Range to High Range is on-the-go for added convenience.
Forward - Low Range, Speed Range 2	20 km/h
Forward - Low Range, Speed Range 1	10 km/h
Reverse - Low Range, Speed Range 2	20 km/h
Type (2)	Creeper control allows maximum speed range adjustability from 0 to 10 km/h (6 mph) in Speed Range 1.

Power Train

Front Axle	Fixed
Rear axle - Oscillation	ï¿½11 degrees
Type (2)	A built-in clutch on one motor de-clutches at higher speeds to gain maximum travel speed.
Brakes - Service Brakes	Inboard wet disc
Front Axle - Traction Aid	Locking differential
Brakes - Park Brake	Cable applied, spring release
Rear Axle	Oscillating
Rear Axle - Traction Aid	Locking differential
Type (1)	Power train is fully hydrostatic, operating with twin motors on a gear reduction system to amplify torque.

Tires

Tire Size - Optional (3)	15.5-R25
Tire Size - Optional (2)	16.9-24 12PR
Tire Size - Standard	15.5-25 12PR
Tire Size - Optional (1)	16.9-24 10PR
Note	Wheel sets are interchangeable between the 910K and 914K.
Tire Size - Non-Pneumatic - Flexport	53.5ï¿½9ï¿½16.5 (15.5/17.5ï¿½25 equivalent)

Cab

ROPS	ROPS: SAE J1040 MAY94, ISO 3471-1994.
FOPS	FOPS: SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II.
Sound	The declared dynamic operator sound pressure level per ISO 6396:2008 is: - Deluxe cab: 75 dB(A)

Operating Specifications

Rated Bucket Capacity	2.5 m³
Full Turn Tipping Load - Standard Lift	4291 kg
Full Turn Tipping Load - High Lift	4012 kg
Full Turn Tip Load	4518 kg
Reach - Full Lift and 45° Dump	759 mm
Steering Articulation Angle - Each Direction	40 °
Clearance - Full Lift and 45° Dump	2853 mm

SELECT MODELS TO COMPARE

Compact Wheel Loaders

906M Ag Handler

Maximum Gross Power 54.6 kW

Engine Model Cat® C3.3B DIT*

Maximum Gross Power - ISO 14396 54.6 kW

Maximum Gross Power - ISO 14396 (metric) 74.2 mhp

Compare models

Compact Wheel Loaders

910M

Engine Model Cat C4.4

Rated Power 72.0 kW

Operating Weight 7110 kg

Bucket Capacities 1.3-m3 (1.7 yd3)

Compare models

Compact Wheel Loaders

903C

Net Power 30 kW

Engine Model Cat C2.4

Operating Weight 3835 kg

Type ???????????????????

Compare models

Compact Wheel Loaders

910H

Net Power 63 kW

Engine Model Cat C4.4

Operating Weight 6880 kg

Type ???????????????????

Compare models

Compact Wheel Loaders

907M Ag Handler

Maximum Gross Power 54.6 kW

Engine Model Cat® C3.3B DIT*

Maximum Gross Power - ISO 14396 54.6 kW

Maximum Gross Power - ISO 14396 (metric) 74.2 mhp

Compare models

Compact Wheel Loaders

908M

Maximum Gross Power 54.6 kW

Engine Model Cat® C3.3B DIT*

Maximum Gross Power - ISO 14396 54.6 kW

Maximum Gross Power - ISO 14396 (metric) 74.2 HP

Compare models

Compact Wheel Loaders

906

Net Power 51 kW

Gross Power 56 kW

ISO 9249 Rating 53 kW

EEC 80/1269 Rating 53 kW

Compare models

Compact Wheel Loaders

907

Maximum Gross Power 55.7 kW

Engine Model Cat C2.8*

Maximum Engine Speed 2550 rpm

Maximum Gross Power - Rated Engine Speed 2400 r/min

Compare models

How to buy

VIEW ALL

SEND REQUEST

Select your equipment and fill out your contact information

GET A QUOTE

A sales rep will send you an official quote and other related information

DELIVERY & PAYMENT

Payment – Lead time - Delivery